Durable
Polyethylene Debris Chutes
Wraparound
Sections
BENEFITS
OF THE WELDED DESIGN (THE ORIGINAL
SUPERCHUTE DESIGN)
- No Assembly
required: Permanent tubes with
the seam welded shut.
- Sections
stack like coffee cups for easy
transport and storage.
- Fully
compatible with all WRAPAROUND
chute sections.
BENEFITS
OF THE WRAPROUND DESIGN:
- Minimal
storage space required: Opened
chutes stack like sheets of plywood.
- Easy to
transport from job-to-job in pick-up
trucks.
- Fully
compatible with all WELDED chute
sections.
Cabling
Linking System
 |
| Every
Superchute section is equipped
with a pair of strong cable
assemblies. The maximum allowable
height of a chute system is
200 feet, subject to: the chute
diameter used, and adequacy
of the supporting structure
and anchors. |
Steel
Liners
 |
If
you will be removing heavy
and abrasive debris, install
a few steel liners in the
parts of the chute that are
more likely to wear.
For
example, the last few chute
sections curving into the
container.
|
Chute
Hoists
|
Facilitate
your chute installation with
one of our SAFE & SIMPLE
chute hoists. Each hoist breaks
down to just a few key pieces
that can be carried by one man
and fit into an elevator car.
Only 5 minutes to assemble using
locking pins.
|
Container
Drencher
 |
To
prevent container fires, keep
the contents of the trash container
wet at all times. Use the Superchute
drencher as part of your overall
fire prevention.
|
Name Branding
Debris
Chutes 
