•  New
•  Innovative
• Long
• Strong
• Wide
• Flexible
• Safe
• Economic

A new optimized mast

The galvanized A-50 mast is made of 1.5m (5 ft.) long sections of special steel with improved strength characteristics. It allows for at lease 15m (50 ft) distances between ties and freestanding heights of 32m (105 ft) indoors or 22m (72 ft) outdoors on mobile chassis.

Truly Innovative

Two different drive units are incorporated in the APF modular system. Fitting the 1.5m (5 ft) wide, 1.5 or 0.8 m (5 or 2.6 ft) long platform sections to APF-A drive units will give you the traditional work platform configuration, single or twin masted.

Recesses and balconies

The decks of the APF platforms have extraordinary width extension possibilities. An additional deck width of up to 2.7m (9 ft) can be achieved, enabling the platform to contour to most building facades. In addition, the platform range incorporates sections of different shapes (angles) to over come changing facade curvature.

Catwalk

If you have a multi-platform configuration on a builing you may want to be able to pass from one platform to another while at work. You will get that possibility by installing a catwalk between the platforms. This can be done also around a corner.

Every building has its corners

And so has the APF platform! By fitting a corner platform section to an APF-B drive unit, it is possible for two platforms to share one mast around a corner.

Benefits:
- reduction of the total number of masts and ties needed
- quicker installation
- fewer tie points to repair
= lower costs

An innovation in Mast Climbing Work Platforms

Beta Max presents a mast climbing system perfect for light duty projects including: Painting, Caulking, Tuckpointing, EIFS, Siding, Glazing, Light Restoration and Metal Building Installation.

The Max Climber 5700/2750 vs.
Other Mast Climbing Work Platforms

•  Easier to transport to the job site
•  No forklift or crane needed for installation
•  Double-masted system easily installed by 2 or 3 men
•  2 men can erect a double-masted system up to 100 ft.in one day
•  Less point load per tower section. Each 5 ft. section weighs just 100 lbs
•  Fits through door openings making it perfect for interior projects
•  Higher speed than most other models.

• Max Height: 265 ft
• Max Length: 18 ft
• Max Width: 4.5 ft
• Max Payload: 2750 lbs (evenly distributed on platform
• Tie-in (every): 20 ft
• Mast Section: 5 ft each
• Climbing Speed: 35 F.P.M.
• Power Supply: 220 V/3 phase
• Motor Gears: 2 x 1.5 kw

• Max Height: 265 ft
• Max Length: 70 ft
• Max Width: 4.5 ft
• Max Payload: 5700 lbs (evenly  distributed on platform
• Max. Dist. between Mast: 40 ft
• Tie-in (every): 20 ft
• Mast Section: 5 ft each
• Climbing Speed: 35 F.P.M.
• Power Supply: 220 V/3 phase
• Motor Gears: 4 x 1.5 kw